Factory-direct supply of high-performance PE, PP, and PVC tarpaulin sheets and master rolls engineered for rugged industrial, agricultural, and logistics applications.
Modern industrial enclosures demand an exacting balance between photon transmission, hydrostatic impermeability, tear propagation resistance, and long-term chemical stability under intense solar radiation.
Utilizing high-purity virgin Polyvinyl Chloride resin blended with non-migratory plasticizers and Hindered Amine Light Stabilizers (HALS), crystal-clear PVC delivers glass-like optical transparency (up to 95%). Designed specifically for commercial winterization curtains, clear architectural patio enclosures, and cleanroom partitioning where distortion-free visibility is paramount. Engineered to pass ASTM D1003 haze standards while retaining flame retardancy under NFPA 701 and B1 specifications.
For high-wind, heavy-stress agricultural and industrial applications, transparent tarpaulins incorporate a high-tenacity 1000D/1500D polyester or high-density polyethylene (HDPE) woven inner scrim enveloped between dual laminates of clear polymer film. This structural matrix prevents catastrophic tear propagation while permitting up to 85% diffuse sunlight transmission, offering superior dimensional stability under fluctuating ambient temperatures.
| Material Engineering Parameter | Crystal Clear PVC Film Tarp | Reinforced Clear PE Grid Tarp | Standard Opaque Poly Tarp |
|---|---|---|---|
| Nominal Weight Range (GSM) | 400 – 900 GSM | 140 – 300 GSM | 80 – 280 GSM |
| Visible Light Transmission (VLT) | 91.5% - 94.8% (Glass Clarity) | 78.0% - 85.0% (Translucent) | 0% (Blackout / Opaque) |
| Tensile Strength (Warp / Weft) | 1800 / 1600 N/5cm | 2200 / 2000 N/5cm | 1200 / 1000 N/5cm |
| Hydrostatic Pressure Rating | > 150 kPa (100% Impermeable) | > 100 kPa (Waterproof) | > 60 kPa |
| Flexural Cold Crack Threshold | -30°C to -45°C (Custom Formulation) | -40°C | -20°C |
| Joint Sealing Technology | High-Frequency Thermal RF Welding | Hot-Air / Ultrasonic Fusion | Heat Sealing Tape |
Linyi Xinshengyang Plastic Products Co., Ltd. (Star Tarpaulins) integrates full vertical manufacturing—from resin compounding to high-frequency RF thermal welding—ensuring absolute quality consistency and cost efficiency.
Located in Wanggou Industrial Park, Lanshan District, Linyi City, our state-of-the-art production base houses 45 high-speed circular looms, 6 multi-layer co-extrusion tape drawing lines, and 4 heavy-duty lamination systems, outputting over 20,000 metric tons per year.
Equipped with computerized laser cutting systems, automatic eyelet punching machines (brass, stainless steel, aluminum), and reinforced corner patch welders. Seams are joined via automated 12kW High-Frequency welding units to guarantee zero leak failure.
Every raw polymer batch undergoes Melt Flow Index (MFI) verification. Finished clear tarps are tested for hydrostatic burst pressure, accelerated QUV aging, tensile/tear limits, and optical haze metrics prior to container loading.
Transparent waterproof tarpaulins serve critical functions across diverse sectors, acting as durable climate barriers, sunlight conduits, and high-visibility protective shields.
Clear grid-reinforced PE and high-transmittance PVC tarps are widely used in commercial horticulture, berry tunnels, and livestock winterization. They permit maximal photosynthetically active radiation (PAR) while providing thermal retention and complete defense against hail, frost, and high winds.
Hospitality venues, outdoor dining spaces, and residential verandas utilize crystal-clear 0.5mm – 0.8mm PVC tarpaulins to extend seasonal usability. Engineered with roll-up zipper tracks, heavy-duty webbing borders, and anti-static coatings that resist dust accumulation.
Scaffolding weatherization shrouds, clear warehouse curtain walls, and specialized transport covers require light visibility for worker safety alongside extreme tear resistance. Transparent grid tarps meet strict site safety standards while allowing ambient light to illuminate work zones.
During disaster recovery operations, clear reinforced tarpaulins provide immediate, translucent emergency roofing and weather-tight window coverings, keeping wind and water out while maintaining natural interior lighting without grid electricity.
Our engineering team continually pushes the boundaries of flexible membrane technology, addressing key industry pain points such as plasticizer migration, UV degradation, and thermal insulation efficiency.
Integrating chemical anti-dripping additives into the interior polymer matrix. This reduces surface tension, converting water droplets into a continuous thin film that runs harmlessly down the slope, preserving 15% more light transmission and preventing crop disease caused by dripping water.
Replacing volatile monomeric plasticizers with high-molecular-weight polymeric alternatives. This breakthrough eliminates surface tackiness, prevents hardening/embrittlement over time, and doubles outdoor service life in high-temperature environments such as the Middle East and Australia.
Pioneering eco-friendly transparent tarpaulin lines utilizing post-consumer recycled (PCR) polyethylene cores paired with bio-based clear polyolefin laminates. Designed to fulfill EU REACH circular economy mandates without compromising tensile load resistance.
We streamline international trade for major importers, government procurement bodies, and industrial distributors by ensuring strict adherence to international safety and environmental protocols.
Direct answers from our polymer engineering department to assist you in selecting the ideal material specification for your regional market.
Crystal Clear PVC Tarpaulin is a solid, unreinforced polymer film offering glass-like optical transparency (over 92% VLT). It is heavier (typically 400–900 GSM) and ideal for patio enclosures, gazebo windows, and cleanroom curtains where distortion-free visibility is essential. Clear PE Grid Tarpaulin features a woven inner scrim (mesh fabric) laminated between transparent polyethylene films. It is lighter (140–300 GSM), highly tear-resistant, and provides translucent light diffusion, making it ideal for agricultural greenhouses, scaffold weather proofing, and heavy construction site covers.
Yellowing and embrittlement are caused by ultraviolet (UV) photo-oxidation breaking polymer chains. We integrate 3% to 5% high-grade Hindered Amine Light Stabilizers (HALS) alongside specialized UV absorbers (UV-389 masterbatch) directly during the extrusion phase. This formulation neutralizes free radicals created by solar radiation, maintaining optical clarity and mechanical flexibility for 3 to 5 years of continuous outdoor exposure in tropical or desert regions.
For standard stocked specifications, our MOQ starts from a single mixed 20ft container. For custom GSM, non-standard widths (over 2 meters), specific color borders, or printed logo artwork, the MOQ is 3 metric tons per specification. Pre-production custom samples are dispatched within 3 to 5 working days via express courier, while full container production orders typically ship within 15 to 25 days following artwork approval.
Yes. Clear PVC tarpaulins can be easily spliced, repaired, or fitted with tracking strips using standard hot-air guns or High-Frequency (RF) portable welders at temperatures between 380°C and 420°C. Clear PE grid tarps can be thermally joined using hot-air sealing units or specialized clear poly repair tapes designed for greenhouse applications.
Standard PVC can become stiff and prone to cracking at temperatures below 0°C. However, our specialized cold-resistant formulation incorporates cold-flex plasticizers that lower the glass transition temperature (Tg), allowing the material to remain supple and fold-resistant down to -40°C (-40°F). This makes them suitable for harsh winter climates in Northern Europe, Canada, and Russia.
We offer end-to-end OEM/ODM manufacturing. Options include custom sheet sizes (from 2x2m up to 30x30m), reinforced corner patches (plastic or rubber), eyelet material selection (aluminum, brass, stainless steel, or plastic), eyelet spacing (from 20cm pitch to 100cm), heavy-duty webbing perimeter reinforcement, zippered roll-up doors, and custom barcode/retail insert packaging.
Explore our complete export line of PP, PE, and PVC woven fabrics engineered for agriculture, logistics, construction, and disaster relief operations.
Contact our sales engineering department today. We provide full container load (FCL) pricing, custom material testing reports, and pre-production physical swatches within 3 working days.
